Description
Car Builders Peel & Stick Heat Shield pressure sensitive adhesive makes these heat shields easy and versatile to install, particularly in tight spaces. It is widely used as a thermal barrier in many industries and works effectively to block heat around fuel tanks/systems, tunnel shields, floor pans, exhaust systems, body shields, transmissions, fluid lines and to protect non ferrous materials. Constructed from a needle punched fibreglass with a polyester core and durable aluminium face that comes in two thicknesses. The product has been oven test for 30 hours with no failure at 475ºF (246ºC).
Pros- Direct apply to surface being protected, ideal for tight spaces. Can be applied to plastic surfaces e.g. fuel tanks.
Features/Advantages
- Light Weight
- Easily formed into place
- Very effective in limited space
- Approved at several major OEM’s
- Acoustical sound deadening benefits without the squeak or rattle issues of stampings
- Interior or exterior applications
- Easy installation – just peel off the release liner and adhere to surface.
Applications
- Fuel tank/system
- Tunnel shields
- Floor pans
- Exhaust systems
- Body shields
- Transmissions
- Steering components
- Fluid lines
- Rubber mounts
- Axle bushings
Technical Specifications
Material Type: Polyester & Fiberglass core material
Temperature: Withstands 246ºC (475ºF) oven test for 30 hours with no failure
Core Thickness: 3mm (0.125 inch)
Foil Thickness: 0.2mm (0.010”)
Weight: 915-1400 g/m (3-4.5 oz/ft2)
Moisture Absorption: 0.3%
Thermal Conductivity 24ºC: 0.036 W/m/ºK
(K-value) 93ºC: 0.043 W/m/ºK
Adhesion To E-Coated Steel 22.1 N/cm after 24hr Dwell
Tensile Strength 526 N/cm2
Tear Resistance 333 N/cm
Installing Peel & Stick Heat Shield
Additional information
Brand |
---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.