DUAL SENSING SMART START BATTERY ISOLATOR 12V 100A
KWD 59.000
The REDARC Smart Start SBI12D 100A dual battery isolator enables the user to charge a 12 volt start battery from a solar panel or battery charger on the auxiliary battery.
Out of stock
Description
The REDARC Smart Start® SBI12D is a microprocessor controlled battery isolator used in a dual battery system. It is designed to be used in dual battery systems as a solenoid priority system to protect the start battery from excessive discharge. The SBI12D provides 12 volt DC incorporating 100A of continuous ratings.
DUAL SENSING
The dual sensing model is used to isolate the start and auxiliary batteries in a system where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The SBI12D also allows the start battery to be charged by the external source once the auxiliary battery reaches 13.2 volts. This is useful to top up the start battery.
POWER SAVING TECHNOLOGY
The Smart Start SBI12D incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.
Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a high quality fuse kit.
FEATURES
- Overmould design
- Compact in size and easy to install
- Silver contacts for longer life and suitable for marine applications
- Power saving technology
- Fault indication
- Fully surge protected
| gtin_barcode | 9338628001330 |
|---|---|
| brand | REDARC |
| Max. Inrush Current | 400A |
| Max. Continous Current | 100A |
| Turn On Voltage | 13.2V |
| Turn Off Voltage | 12.7V |
| Turn On Delay | 5 seconds |
| Turn Off Delay | 10 seconds |
| Standby Current | <5mA |
| Weight | 200 g |
| height | 70 mm |
| width | 75 mm |
| depth | length | 80 mm |
| Warranty | 2 Years |
| System Voltage | 12V |
| Output Voltage | 12V DC |
| Input Fuse Rating | 100A |
| Output Fuse Rating | 100A |
Additional information
| Brand |
|---|
Only logged in customers who have purchased this product may leave a review.
Related Products
PORTABLE BATTERY BOX
BCDC UNIVERSAL MOUNTING BRACKET
DUAL BATTERY MONITOR
40A FUSE KIT
1500W DOMETIC SINE WAVE INVERTER
ANDERSON PLUG T-HANDLE – GREY
BCDC CORE IN-CABIN 40A DC BATTERY CHARGER
120W PORTABLE SOLAR PANEL KIT
5M ANDERSON TO ANDERSON CABLE
2000W PURE SINE WAVE INVERTER
ROOF LIGHT WIRING CONCEALER
120W MONOCRYSTALLINE SOLAR PANEL
1.5M ANDERSON TO BATTERY CLIP CABLE
SOLAR REMOTE MONITOR
Dometic PerfectPower DCC 1212-40
WATER TANK SENSOR KIT
Dometic Büttner MT PRO7
60A FUSE KIT
140 AMP DUAL BATTERY MANAGER
TVMS ROGUE WITH REDVISION DISPLAY
600W DOMETIC SINE WAVE INVERTER
2000W DOMETIC SINE WAVE INVERTER
Power Bank Jump Starter
20 AMP SOLAR REGULATOR
Dometic PerfectBattery BR 12
Dometic Sine Power Inverter 3500W
100AH LITHIUM DEEP CYCLE BATTERY
Dometic DC Hardwiring Kit
Dometic PerfectCharge MCP 1207
200W MONOCRYSTALLINE SOLAR PANEL
1000W DOMETIC SINE WAVE INVERTER
PRIME REDVISION SYSTEM
BCDC CORE IN-CABIN 25A DC BATTERY CHARGER
DOMETIC PLB40
THE MANAGER30
180W MONOCRYSTALLINE SOLAR PANEL
275 AMP BATTERY MANAGER
115W SOLAR BLANKET SUNPOWER CELLS
200W PORTABLE SOLAR PANEL KIT
12V DUAL BATTERY MONITOR
JIMNY 2018+ cruise control
Reviews
There are no reviews yet.