SCOPE 9″ LED DRIVING LIGHT

Description

HOODED REFLECTORS

The true brilliance in the Scope 9″ driving light is the inclusion of the Hooded Reflectors which are positioned along the top and bottom of the light harnessing 6x 12W high power LEDs.

Hooded reflectors are hugely more effective and efficient, as the LED shines directly into them unlike a traditional reflector cup where huge amounts of light is lost.

A Spot and a Combo version of the hooded reflector is available – the Combo driving light pushes more light out in a greater spread, while the Spot driving light puts all its effort into getting the light as far down the road as possible.

The combination of high-power LEDs and the efficiency of these reflectors means fewer LEDs, less power draw and less heat – and that means a more durable and high performing driving light!

DEEP DISH REFLECTOR CUPS

Ironman 4×4, alongside most driving light manufacturers in the market, has been utilising traditional reflector cup technology for many years. Unfortunately, many driving lights with small and shallow reflector cups can be largely inefficient.

Our Deep Dish Reflector Cups are up to 100% deeper than traditional cups, offering great improvements in light efficiency. This middle row of LEDs provide great light output directly in your sight line for an optimal driving experience.

The Scope 9″ driving lights feature 4 high-powered LEDs running through the centre of the light. The light, from these LEDs, is captured by our Deep Dish Reflector Cups and projected out.

DIMMABILITY

The 9″ Scope driving light can be dialled down at the touch of a button, cutting power by 80%.

With lights this powerful, sometimes you need to turn it down a bit. When approaching regional towns, reflective road signs increase in density and can be very distracting to a driver.

While still providing improvements over your vehicle’s stock high-beams, the power cut greatly improves the driving experience in these conditions.

SIDE SHOOTERS & POSITION LIGHTS

To the sides, a pair of diffused optic lenses take the light from 8 LEDs and provide great vision to the immediate peripherals to the front of the vehicle.

Additionally, when the driving lights are not switched on, the side shooters can be activated as position lights coupled with the nicely illuminated branding at the top.

HEAT DISSIPATION & COLOUR

Heat is the biggest enemy to the performance of an LED, and therefore it’s critical to get heat away quickly.

The 9″ Scope driving light runs a minimal 10x 10-12W LEDs, which are directly mounted to the cast housing. Utilising the hugely efficient reflectors and less LEDs already generates less heat – coupled with clever mounting to the cast housing ensuring maximum performance and brightness over long periods.

Scope 9″ driving lights run a 5700 Kelvin colour rating – a colour most closely matched to that of daylight is easier on the eyes!

DURABILITY IS SUITABILITY

• IP68 protection against water and dust ingress
• Case Breather – allows hot air to escape to eliminate condensation and ensure a water-tight seal is maintained
• Case mounted LEDs – allow for fast heat dissipation, keeping the lights cool and LEDs bright
• Virtually indestructible polycarbonate lens
• Rust-preventing facia with no front facing screws to capture and hold moisture
• DuPont powder-coated cast aluminium housing with stainless steel mount system
• Centre and side pinning bolts for ultimate rigidity
• 3-year warranty